440PZ

The self-forming trilobular screw is a triangular section screw with metric thread suitable for direct screwing in blind or through holes. Its main feature consists in avoiding the threading phase in steel and light alloy products. During screwing, this screw forms the thread plastically, i.e. by deforming the material, thus creating a play-free coupling between screw and nut, therefore an optimal fixing with a high resistance to tearing and unscrewing necessary under the conditions of use. The creation of the thread in this condition avoids the formation of shavings, a feature particularly required by several regulations concerning threads on blind holes. Regardless of the length of the screw, the efficiency of this thread is expressed in the first 20 / 25mm only starting from the tip. The presence of a longer thread has no effect on the screw's sealing capacity. The utmost attention must be paid to the holes or pins in the die casting used to create the holes: an incorrect hole, even if only five cents, can in some cases radically change the tightness of the screw. It must be said that not all the tables in circulation are correct for the use of the screws in question; this situation has created a sequel to the regulatory grouping of various types of self-forming screws which, however, have different characteristics and different differences in use. Our long and established technical experience guarantees that the hole required for any type of use is four or five tenths of a maximum less than the nominal diameter of the screw; in case of die-casting, a maximum taper of one degree must be calculated. Different tapers can create problems during particularly heavy tightening, as they interfere with the regulation of the screw: it can in fact have a forming part of four times its own pitch. Our trefoil screws, in addition to the galvanic treatment according to RoHs regulation, are subjected to a lubrication treatment, necessary to reduce the screwing effort by 30%.

The length of the screw is measured from the tip to the underhead.